#16-NA-309: Electric Charge Cord Velcro Strap Installation During Pre-Delivery inspection (PDI) – (May 14, 2018)
|Subject:||Electric Charge Cord Velcro Strap Installation During Pre-Delivery Inspection (PDI)|
|Involved Region or Country||North America, Europe, South Korea, Middle East|
|Condition||In the trunk bag there is a velcro strap that needs to be installed to the tool stowage assembly during the PDI process to retain the electric charge cable when not in use.|
The following are instructions showing the assembly of the velcro strap in the trunk kit.
- Remove the strap from the pocket.
- Insert the strap through the two holes illustrated above.
- Once the velcro strap is installed, the electric charge cable can be placed in the middle of the straps location.
|Modified||May 14, 2018 – Added the 2018-2019 Model Years, the Opel Ampera-e and added Europe/Middle East to the Involved Regions or Country.|
Schneider Electric EV230WS EVlink 30-Amp Generation 2.5 Enhanced Model Indoor Electric Vehicle Charging Station