“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10080685
Manufacturer Communication Number: PIP5277B
Summary
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON THE STEPS TO DIAGNOSE AND REPAIR VEHICLES THAT HAVE A RESONANCE TYPE VIBRATION OCCURS BETWEEN 40 TO 60 MPH. IN MOST CASES THE ENGINE MUST BE UNDER A SLIGHT LOAD SUCH AS A/C COMPRESSOR ENGAGEMENT, LIGHT THROTTLE, AND IN 6TH GEAR TORQUE CONVERTER CLUTCH APPLIED. TECHNICIAN WILL RELAX THE ENGINE AND TRANSMISSION MOUNTS, THEN THE EXHAUST SYSTEM BY LOOSENING THE FRONT PIPE STUDS. ALSO WORK DOWN THE SYSTEM DISCONNECTING ONE EXHAUST HANGER AT A TIME. THEN TAKE THE VEHICLE ON A TEST DRIVE TO VERIFY THERE WAS IMPROVEMENT. IF ADDITIONAL STEPS ARE REQUIRED PLACE TWO SETS OF EXHAUST DAMPENERS ONE SET BEFORE AND ONE SET AFTER THE FRONT CATALYTIC CONVERTER. IT MAY BE REQUIRED TO MOVE THE PAIR OF DAMPENERS ALONG THE EXHAUST SYSTEM TO GET THE BEST RESULTS.
16 Affected Products
Vehicles
MAKE | MODEL | YEAR |
CHEVROLET | EQUINOX | 2010-2017 |
GMC | TERRAIN | 2010-2017 |
Condition/Concern
Resonance type vibration occurs between 40 to 60 MPH.
In most cases the engine must be under a slight load such as A/C compressor engagement, light throttle, and in 6th gear tcc applied.
It also is described as a 2nd order engine boom or vibration. In most cases this is an inherent condition on 4 cylinder models, however in some cases this condition is much more amplified.
1 Associated Document
Service Bulletin Document
Bulletin No.: PIP5277B
Date: Jun-2016
https://www.nhtsa.gov/recalls?nhtsaId=10080685
SB-10080685-2280.pdf 292.633KB
NHTSA ID Number: 10115122
Manufacturer Communication Number: PIP5277A
Summary
This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that have a resonance type vibration occurs between 40 to 60 MPH. In most cases the engine must be under a slight load such as Air Conditioning compressor engagement, light throttle, and in 6th gear Torque Converter Clutch applied. Technician will relax the engine and transmission mounts, then the exhaust system by loosening the front pipe studs. Also work down the system disconnecting one exhaust hanger at a time. Then take the vehicle on a test drive to verify there was improvement. If additional steps are required place two sets of exhaust dampeners one set before and one set after the front catalytic converter. It may be required to move the pair of dampeners along the exhaust system to get the best results.
1 Associated Document
Manufacturer Communications
Bulletin No.: PIP5277A
Date: Nov-2015
https://www.nhtsa.gov/recalls?nhtsaId=10115122
MC-10115122-9999.pdf 295.986KB
NHTSA ID Number: 10139367
Manufacturer Communication Number: PIP5277
Summary
This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that have a resonance type vibration occurs between 40 to 60 MPH. In most cases the engine must be under a slight load such as Air Conditioning compressor engagement, light throttle, and in 6th gear Torque Converter Clutch applied. Technician will relax the engine and transmission mounts, then the exhaust system by loosening the front pipe studs. Also work down the system disconnecting one exhaust hanger at a time. Then take the vehicle on a test drive to verify there was improvement. If additional steps are required place two sets of exhaust dampeners one set before and one set after the front catalytic converter. It may be required to move the pair of dampeners along the exhaust system to get the best results.
1 Associated Document
Manufacturer Communications
Bulletin No.: PIP5277
Date: Mar-2015
https://www.nhtsa.gov/recalls?nhtsaId=10139367
MC-10139367-9999.pdf 283.157KB
“This site contains affiliate links for which OEMDTC may be compensated” |
- COMPATIBILITY – Fits 1992-1992 Chevrolet Blazer; 1993-1993 Chevrolet Blazer; 1994-1994 Chevrolet Blazer; 1988-1988 Chevrolet C1500; 1989-1989 Chevrolet C1500; 1990-1990 Chevrolet C1500; 1991-1991 Chevrolet C1500; 1992-1992 Chevrolet C1500; 1993-1993 Chevr
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- INHIBITS CORROSION -- Durable aluminized-steel construction to inhibit corrosion and promote performance
- EASY TO INSTALL -- Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE -- Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- Dual Cat Back Design with Rear Exit.
- Corrosion Resistant 409 Stainless Steel | 16 Gauge Tubing | 409 Stainless Black Muffler and Clamps.
- Dual Wall Stainless Steel 304 Black Tips | Can Retain your OEM Dual Tips.
- Installs into OEM Hangers | No Welding | Easy at Home Installation.
- Backed by Rough Country's Limited Lifetime Replacement Warranty.
- Dual Conversion Exhaust Kit: Enhance the performance and style of your 1989-2002 Chevy/GMC C and K pick-up trucks 1500/2500 with our high-quality dual conversion exhaust kit.
- Premium 304 Stainless Steel: Crafted from durable 304 stainless steel, this kit ensures long-lasting performance, corrosion resistance, and reliable operation, making it a perfect upgrade for your truck's exhaust system.
- Polished Mirror Finish: The exhaust kit features a polished mirror finish that not only adds a sleek and stylish look to your vehicle but also helps to prevent rust and corrosion, maintaining its appearance over time.
- Compatibility: Specifically designed to fit 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 Chevy / GMC C and K pick up trucks 1500 / 2500 models, ensuring a direct fit.It is a great choice for anyone who wants to upgrade their vehicle's exhaust system.
- Easy Installation with Some Modifications: Please note that this is not a direct fit kit and some modifications may be required for a proper installation.
- Made of high quality T-304 stainless steel with flex.Material:Stainless Steel
- TIG welded CNC machine flange for resistance against pressure and corrosion
- Flanged to bolt to factory manifold
- Slips over factory exhaust pipe to be clamped or welded to repair broken flex section
- 2. 25"diameter 3-bolt inlet to 2. 25" factory sized pipe outlet
- ✅HRepair Exhaust Tips Bezels compatible with 2019-2023 GMC Sierra 1500 2019-2023 Chevy Silverado 1500 silverado exhaust tip.
- ✅HRepair Exhaust Tips Bezels replacement OEM# 2253506 84434641 84434642.
- ✅Easy installation without the need for other installation tools, saving a lot of time.
- ✅OEM manufacturing standards, perfectly compatible with GMC Sierra Chevy Silverado Exhaust Tips Bezels.
- ✅We offer free lifetime replacement and refund policy for "Exhaust Tips Bezels".
- Disclaimer* This product does not interfere with any portion of the vehicle’s emissions control systems; The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle; This product is in compliance with the Clean Air Act in full
- Welding not Required
- Installation Hardware Included
- single 3"/dual 2.5" Flowmaster Super 10 Muffler
- Two 2.5" Mandrel-bent tailpipes, cut and swedged
- Two 3.5"x18" WELD-ON angle-cut chrome tips
- Multi-depth insulated hangers & muffler clamps
- 【Vehicle Fitment】Stainless Steel Exhaust Manifold Fit for Stainless Steel Exhaust Manifold Fits for 1992-1994 Chevrolet Blazer, Replacement for 1988-1995 Chevrolet C1500/ C2500/ C3500/ K1500/ K2500/ K3500, for 92-95 Chevrolet C1500/ C2500/ K1500/ K2500 Suburban,for 1988 Chevrolet R30/ V30, for 1989 Chevrolet R3500/ V3500,for 1995 Chevrolet Tahoe,for 1988-1995 GMC C1500/ C3500/ K1500/ K2500/ K3500, for 1988-1997 GMC C2500, for 1992-1995 GMC C1500/ C2500/ K1500/ K2500 Suburban, for 1988-1989 GMC R3500/ V3500. (Please select a suitable model before purchasing).
- 【Quality materials】Exhaust Headers made from high-strength steel, heavy duty tubes and collectors, High-quality 304 stainless steel with shock absorption, noise reduction and convenient installation for superior stability.
- 【Production Process】Racing Exhaust Manifold Kits All joints TIG welding process for great resistance against cracking and wearing; surface polishing treatment, and not easy to deformation, with good corrosion resistance and sealing for extra resistance against rusting, exhaust silencing system long service life, high safety and promote the maintenance of the interior of the car.
- 【Make Driving Safer】Easy to Install - Direct replacement for Exhaust Manifold Most of the enclosures and stainless steel pipe connections are equipped with reinforced pull tabs, which greatly alleviate the bumpy force of the exhaust manifold during driving, exhaust manifold increase driving safety.
- 【Great Service】This Exhaust Manifold with Gasket Kit Replacement for 1988-1997 Chevy/GMC C/K1500 2500 5.0L/5.7L V8 Pickup Engine, Easy to Install - precisely positioned to ensure the precision of products and suitable for loading, If you have any problems during use, please feel free to contact us, we will give you a reply within 24 hours to provide you good shopping experience.
- Looking for the origional Flowmaster sound Then take a look at these 40 series Flowmaster mufflers.
- High Quiality 2.5 inch Mandrel Bent Aluminized Tail Pipes
- Installation Hardware Included
- Welding not Required
- Disclaimer This product does not interfere with any portion of the vehicle’s emissions control systems. The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle. This product is in compliance with the Clean Air Act in full.
Last update on 2024-05-14 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Subject: Models: Service Bulletin PRELIMINARY INFORMATI01N Engine Vibration – Resonance/Boom Between 40 To 60 MPH 2010 – 2017 Chevrolet Equinox 2010 – 2017 GMC Terrain Equipped With the 2.4 Cylinder Engine (RPO’s LAF and LEA) This Pl was superseded to update Model Years. Please discard PIP5277 A. The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this Pl. Condition/Concern Some customers may comment that a resonance type vibration occurs between 40 to 60 MPH. Bulletin No.: PIP5277B Date: Jun-2016 In most cases the engine must be under a slight load such as NC compressor engagement, light throttle, and in 6th gear tee applied. It also is described as a 2nd order engine boom or vibration. In most cases this is an inherent condition on 4 cylinder models, however in some cases this condition is much more amplified. Recommendation/Instructions Relax engine and transmission mounts, then the exhaust system by loosening the front pipe studs. Work down the system disconnecting one exhaust hanger at a time. Test drive to verify any improvements. If additional steps are required place two sets of exhaust dampeners (part #10199232 and attach with 2 1 /2″ exhaust clamps, part #15595206) one set before and one set after the front catalytic converter. It may be required to move the pair of dampeners along the exhaust system to get the best results (photos attached). This repair will only improve noise and vibration to a condition comparable to like vehicles with the 4 cylinder powertrain. Fabricate 2 dampers using the following procedure: 1. Obtain 4 dampeners, Part Number 10199232. 2. Line up 2 dampeners so the dampener pipes are opposite of each other. 3. Line up one mounting hole from each dampener with the holes of an appropriate size exhaust clamp. 4. With all of the holes lined up, weld the flat portion of the dampeners together and to the flat part of the exhaust clamp 5. Attach the dampeners to the exhaust system using exhaust clamps. Warranty Information For vehicles repaired under warranty use: Labor Operation Description Labor Time 4050272 Exhaust System Alignment Use Published Labor Operation Time Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.
SEOCONTENT-END