“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10163677
Manufacturer Communication Number: PIT5493B
Summary
This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have a fuel gauge that does not read below half a tank. Technician will gain access to the fuel pump and inspect to see if the level sender contacting the side of the fuel tank. The fuel tank fuel pump module fuel level sensor will need to be replaced for this concern.
10 Affected Products
Vehicles
MAKE | MODEL | YEAR |
CHEVROLET | COLORADO | 2015-2019 |
GMC | CANYON | 2015-2019 |
SEOCONTENT-START
Bulletin No.: PIT5493B Published date: 07/24/2019
Preliminary Information
PIT5493B Diagnostic Aid , Fuel Gauge Will Not Read Above OR Below a 1/2 Tank
Product Investigation Review Required Models
Brand: Model: Model Years:
VIN:
from to
Engine: Transmissions:
Chevrolet Colorado 2015 – 2019 All All
All All GMC Canyon 2015 – 2019
All All All All
Supersession Statement
This PI was superseded to update Warranty Information. Please discard PIT5493A.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this
PI.
Condition / Concern
The technician may report after in tank service the fuel gauge will not go over 1/2 tank or will
not go below 1/2 tank.
Recommendations / Instructions
Inspect the fuel level sender and verify it is in the correct slot of the fuel module. In the
picture below, the left fuel module reflects the correct location where as the right fuel module
reflects the incorrect position. Install sender in correct slot to repair.
The picture below is a cut away of the right fuel module indicating the level sender
contacting the side of the fuel tank.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition
exhibited is resolved without completing every step, the remaining steps do not need to be
performed.
SEOCONTENT-END
Bulletin No.: PIT5493B
Published date: 07/24/2019
https://www.nhtsa.gov/recalls?nhtsaId=10163677
https://static.nhtsa.gov/odi/tsbs/2019/MC-10163677-9999.pdf
To View or Download this Document Click Here
NHTSA ID Number: 10154327
Manufacturer Communication Number: PIT5493A
https://www.nhtsa.gov/recalls?nhtsaId=10154327
Bulletin No.: PIT5493
Date: Feb-2016
https://www.nhtsa.gov/recalls?nhtsaId=10096238
https://static.nhtsa.gov/odi/tsbs/2016/SB-10096238-2280.pdf
To View or Download this Document Click Here
“This site contains affiliate links for which OEMDTC may be compensated” |
- The world’s #1 fuel additive for both gasoline and diesel engines
- A great tune-up in a bottle – treats gasoline, diesel fuel and increases MPG
- Cleans and lubricates the fuel system, including fuel injectors, carburetor and combustion chamber
- Improves fuel economy by burning excess exhaust emissions
- Increases power and acceleration by improving fuel flow and reducing deposit buildup
- Removes carbon deposits from engines with over 75,000 miles
- Prevents future carbon buildup on port/indirect fuel injectors, intake valves, and ports
- Maximizes performance and fuel economy
- Reduces emissions
- Oxygen sensor safe and safe for use in turbocharged and supercharged vehicles
- Cleans and lubricates the fuel system
- Increases the life of pumps and injectors
- Neutralizes low sulfur fuel problems
- Increases power and miles per gallon by burning excess exhaust emissions
- Eliminates starting problems, hesitation and stalling.Fit Type: Universal
- Smoother idling
- Better throttle response
- Cleaner combustion
- Unclogs dirty fuel injectors to restore performance
- Helps restore lost power and acceleration
- Removes harmful deposits
- Compatible with cap-less gas systems
- Saves gas
- DESIGNED TO EXCEED EXPECTATIONS: Red Line complete SI-1 fuel system cleaner treatment for cleaning and preventing corrosion in fuel systems
- PERFORM AND PROTECT: Fuel additive cleans injectors, carburetors, valve and combustion chamber deposits with a powerful, concentrated blend of high-temp and low-temp detergents
- EFFICIENT FUEL BURN: Gas treatment that enhances gasoline stability, while reducing the build up of gum and varnish formation
- EASY TO USE: Use one bottle per tank for most effective treatment, additive cleans nearly 100% efficiency in one treatment
- One 15 Ounce Bottle
- Keeps deposits from forming to maintain performance and fuel economy
- Prevents carbon build-up on indirect fuel injectors, carburetors, intake valves and ports
- Maximizes performance and reduces emissions
- Oxygen sensor safe and safe for use in turbocharged and supercharged vehicles
- Will not void OEM/manufacturer's
- 【Test 2 Injectors Simultaneously】Fuel injector cleaner tester can help you diagnose and clean injectors, easily identify common faults such as stuck, blocked, leaked or burnt-out conditions of the fuel injector. Compared with other fuel injector cleaner and tester with only one pair of pulse output teminals(black&red test lead), our fuel injector tester has 2 pulse output teminals(two pairs of test leads), which can test two fuel injectors at the same time for comparison.
- 【8 Pulse Modes & Mode Lock Feature & LCD Display】The fuel injector tester kit is designed with LCD display and 8 pulse modes, which composed of 4 pulse signal output modes and 2 output voltage levels: Short/ Medium/ Long/ Continuous pulse modes + High/Low(12V/5V) power drive modes. This fuel injector cleaning machine can help you to identify good and bad injectors when the engine is off. You can choose any mode as your needs. And its mode lock feature ensures test condition uniformity.
- 【4 Size Adapters&Wide Compatibility】Our injector cleaner is compatible for 12V injectors of almost all vechicle models, for both EFI and GDI injectors.It comes with a large and a small size universal adapters compatible for injectors of most models(except B.MW A.udi),so we newly add 2 adapters to expand its compatibility:a medium size adapter suitable for models such as V.W, A.udi, etc.and another one with threaded hole is exclusively for BMW N series such as N14/N18/N20/N26/N53/N54/N55/N63/S63.
- 【40inch Power Cord & 20inch Test Lead】The length of power cord is up to 40inch/100cm and its test lead is 20 inches,which is more convenient for you to connect and use. The wires are made of superior silica gel, which has better high and low temperature resistance. Fuel injector cleaning kit is powered by 12V battery or an external DC 12V (recommended at least 1.5A) power adapter. It works with engine off and can work with any fuel pressure tester(NOTE: Gasoline car only, NOT the diesel engine).
- 【Polarity Reverse Connection Protection & Short Circuit Protection】This fuel injector cleaner and tester is deigned with power input reverse connection protection and output short circuit protection function. In the case of a damaged fuel injector or a short circuit of the pulse output terminal, the power indicator light of the fuel injector cleaner tool will flash to prompt you.
Last update on 2024-05-04 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.